Cloud LM-2 Series Betriebsanweisung PDF herunterladen (Seite 4)

Z4-8MK3 Installation and User Guide4

Safety Information

Safety Notes regarding Installation

• Do not expose the unit to water or moisture.

• Do not expose the unit to naked ames.

• Do not block or restrict any air vent.

• Do not operate the unit in ambient temperatures

above 35°C.

• Do not touch any part or terminal carrying the

hazardous live symbol ( ) while power is supplied to

the unit.

• Do not perform any internal adjustments unless you

are qualied to do so and fully understand the hazards

associated with mains-operated equipment.

• The unit has no user-serviceable parts. Refer servicing

to qualied service personnel.

• If the moulded plug is cut off the AC power lead for

any reason, the discarded plug is a potential hazard and

should be disposed of in a responsible manner.

Conformities

This product conforms to the following European EMC

Standards:

BS EN 55103-1:2009

BS EN 55103-2:2009

This product has been tested for use in commercial and

light industrial environments. If the unit is used in controlled

EMC environments, the urban outdoors, heavy industrial

environments or close to railways, transmitters, overhead

power lines, etc., the performance of the unit may be degraded.

The product conforms to the following European electrical

safety standard:

BS EN 60065:2012

Safety Considerations and

Information

The Z8MK3 and Z4MK3 must be earthed. Ensure that the

mains power supply provides an effective earth connection

using a three-wire termination.

Caution – High Voltage

Do not touch any part or terminal carrying the hazardous live

symbol ( ) while power is applied to the unit. Terminals to

which the hazardous live symbol refers require installation by

a qualied person.

Caution – Mains Fuse

The internal PSU contains no user-replaceable fuses. Mains

over-current protection is provided by the fuse in the IEC

receptacle; only replace this fuse with one of an identical type

and rating.

Caution – Servicing

The unit contains no user-serviceable parts. Refer servicing to

qualied personnel. Do not perform servicing unless you are

qualied to do so. Disconnect the power cable from the unit

before removing the top panel and do not make any internal

adjustments with the unit switched on. Only reassemble the

unit using bolts/screws identical to the original parts.

1 2 3 4 5 6 7 8 9 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Cloud LM-2 Series Betriebsanweisung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Cloud LM-2 Series