Cloud VTX 4120 Bedienungsanleitung PDF herunterladen (Seite 9)

VTX-WM1 Installation Guide v1.0 9

5. Enter a suitable name for the installation

in the Site Name eld (e.g., name of the

customer and/or building or location, etc.)

6. Use of a password is recommended as it

will prevent unauthorised access to the

network conguration pages - monitoring

of amplier performance and settings is

always possible. Enter a password in the

Site Password eld. A password may

be up to 64 characters in length and will

be case sensitive.

7. If the network has an SMTP mail server,

you may enter an email address in the

Email target eld. This will enable

fault reports to be sent to this address

automatically. For this feature to work,

IP addresses for the mail server and the

system Gateway are also needed; you

should obtain this information from the

IT System administrator. Enter these

addresses in the Mail Server IP

and Gateway IP elds respectively

by clicking the two Set buttons,

which will open the IP address

conguration dialogue box:

8. Click Apply to close the dialogue box.

9. Click Apply (on the Cong page) to

conrm the data entered.

Click the blue Cloud Amplier

button in the left-hand pane (only one

amplier will be listed at present). This

opens the Amplier Properties

page:

10. The rst eld, Unit Name, permits

the amplier itself to be named. This

is extremely useful with large systems

employing multiple ampliers. Each

amplier will be referenced by the Unit

Name on all the GUI pages thereafter.

The name may, for example, be the area of

the building where the speakers that the

amplier is driving are located. (The Unit

Name may be up to 100 characters in

length, but note it will be truncated to 16

characters for the amplier button label.)

11. If the amplier is to have an IP address

other than the default, click the Set

button adjacent to the IP address

eld, which will open the IP address

conguration dialogue box:

12. Enter the IP address for the amplier in

the four numeric elds and click Apply.

We strongly recommend that you keep

a careful record of all IP addresses used,

and also write the address in the IP space

on the VTX-WM1’s rear panel (or print a

label for this purpose).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare